I Put a 4TB NVMe SSD Inside My Thunderbolt 5 Dock
My UGREEN Maxidok Thunderbolt 5 dock has an M.2 slot on the back, so I put a Lexar NM790 4TB in it. Then I benchmarked it twice with the same drive and the same cable. First on my GMKtec EVO-X2 running CachyOS, which has USB4. Then on my Mac Studio, which has Thunderbolt 5. The only thing that changed was the port, and sequential reads went up 70%.
Buy the one without a heatsink
The Maxidok's M.2 slot takes a standard M.2 2280 NVMe drive, PCIe 4.0 x4, up to 8TB. A Gen 5 drive works, but only at Gen 4 speed, so don't pay extra for one.
The dock's lid is the heatsink. There's a thermal pad in the box that goes between the lid and the drive. If you buy the heatsink version of the NM790, like I did the first time, it won't fit. Get the plain one. Lexar rates it at up to 7,400 MB/s read and 6,500 MB/s write. That's Lexar's claim; my numbers are below.
The install
- Thermal pad on the lid. Peel one side of the film and press the pad onto the inside of the lid.
- Take out the M.2 screw. A magnetic driver helps a lot here. I used the one from my iFixit Pro Tech Toolkit.
- Drive in at an angle, press down, screw in. If you can see gold on the connector edge, it isn't fully seated.
- Peel the pad's second film and close the lid. It's a snug fit. It felt like more pressure than I'd like, but that's how UGREEN says to do it.
- Lid screws back in, then check it sits flush.
Linux: the daisy-chain test
Back on CachyOS, I formatted the drive as exFAT so it can move between Linux and my Mac. On the EVO-X2 the dock connects over USB4 at 40 Gb/s. That mini PC doesn't have Thunderbolt 5.
My first runs had my Studio Display daisy-chained through the dock. The display, the SSD and all my USB gear were sharing one USB4 cable. Sequential reads came in around 3,780 MB/s and writes around 2,220 MB/s.
Then I split the display off. The dock went to the EVO-X2's front USB4 port, and the Studio Display got its own cable from the mini PC (HDMI to USB-C). Reads stayed the same at about 3,794 MB/s, but writes rose to about 3,677 MB/s, roughly 66% more. On camera I said "about 1,000" more. The real jump was about 1,457 MB/s.
For context, the same Lexar model inside the EVO-X2 reads at about 6,979 MB/s. So over USB4, the dock gave me a bit more than half of what the drive can do.
Mac Studio: same drive, same cable, Thunderbolt 5
KDiskMark only runs on Linux. On the Mac I ran the same four tests with fio, the engine KDiskMark uses under the hood: 8 GiB test file, five passes each, best pass reported. I didn't take the drive out. I just plugged the same Thunderbolt 5 cable into a Thunderbolt 5 port on my Mac Studio, with the Studio Display still daisy-chained through the dock.
- Sequential read: 6,463 MB/s, up from 3,794 on USB4. That's 70% faster.
- Sequential write: about 3,814 MB/s. That's a little above the best Linux write, even with the display still daisy-chained.
- 93% of the drive's own speed. 6,463 against the 6,979 the same Lexar does inside the mini PC.
Writes topped out around 3.7 to 3.8 GB/s on both computers. My guess is the dock or the exFAT format, but I haven't proven which.
Does daisy-chaining the display matter on the Mac? I haven't tested the Mac with the display on its own port yet. What I can say is that daisy-chained over Thunderbolt 5, the writes were already above my best Linux result with the display split off.
Is it worth it?
On a Thunderbolt 5 Mac, yes. On camera I said it's "really close to internal SSD speeds," and that needs a correction: it's 93% of this drive's own speed, but the Mac Studio's built-in SSD reads at about 14,021 MB/s, roughly twice as fast. For what I keep on it (videos, files and local AI models), 6,400 MB/s is plenty.
The price is the real argument. On an M5 Max Mac Studio, Apple charges $1,800 to go from 512GB to 4TB. By my estimate, the dock plus a 4TB drive comes to about half that. Prices move a lot right now, so check the links. You do get one more box on the desk and one more cable. I'm keeping this setup and skipping the Apple tax.
A few honest caveats:
- Linux and macOS, KDiskMark and fio: different operating systems and test tools. Compare the big sequential numbers, not the small random ones.
- These are five-pass runs on my own machines, not a review lab.
Do you run your external SSD through your dock, or give it its own port?
Sources
- My UGREEN Maxidok review: one dock for my AI PC and Mac
- My GMKtec EVO-X2 SSD upgrade, with the same Lexar NM790 inside the mini PC
- KDiskMark on GitHub, the benchmark I ran on Linux
- fio on GitHub, the engine under KDiskMark that I ran on the Mac
- Apple's price is its configuration pricing for the M5 Max Mac Studio, 512GB to 4TB (August 2026).
🎥 Gear links
- UGREEN Maxidok Thunderbolt 5 dock
- Lexar NM790 4TB SSD (no heatsink)
- iFixit Pro Tech Toolkit
- GMKtec EVO-X2 AI Mini PC
- Sony a6700 with 16-50mm kit lens
- Shure SM7B dynamic microphone
- Shure MVX2U Gen 2 audio interface
- Audio-Technica ATH-M50x headphones
- ADAM Audio D3V speakers
- GMKtec EVO-X2 AI Mini PC
- Logitech G PRO X Superlight 2 mouse
- NEEWER NL288 LED video light
Affiliate links may earn me a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
